- Store
- >
- Firehouse Arc V, Micro, Pro Series Strobes
- >
- "ARC" 2- Pack Drone LED Strobe Light For DJI, Autel, Parrot and other Quadcopters RC Plane
"ARC" 2- Pack Drone LED Strobe Light For DJI, Autel, Parrot and other Quadcopters RC Plane
This is a 2 pack of our Original "ARC" Professional Series Drone Strobes. Please note there is a new version of this model called the Arc "V" that is also now available on our site, the Arc White now is a 5 light strobe as pictured, the colors are the older 4 light led. These have been tested by independent agencies to comply and exceed FAA requirements for flight at night.We recommend mounting one light on top of the aircraft and one on the bottom for 360 degree coverage. This greatly improve visibility for pilot from ground up and aviation looking down. Our new Dual Strobe lights with 3 modes, fixed, flash and spot. 600 Lumen output per light, greater than 3 SM. Fully independent no wiring needed all you need to provide strobes and spot lighting that can assist in maintaining orientation, spotting down or lost drones as well as meets the FAA 107 rule for strobes during night or twilight flights. These can be easily mounted on all Drones and RC Fixed Wing Planes and should be mounted one on top and one on bottom for 360 degree coverage. They are independent of the aircraft electrical system and are powered by there own internal lipo batteries so they do not steal from flight time, not do the reduce flight time due to weight or drag. See the videos on website of the units in operation. This pack includes what most customers were buying individually for there aircraft. Thus we created this listing as a one stop shop to get a complete set. Set includes the following: 2- "ARC" Cree Strobe Lights, USB Charge Cable for lights and 3M mounting tape. With Free Shipping (2-4 Bus. Days) to US locations
Because of human eye's limitations, Every color has different visibility and energy transfer rate.
Also every LED color has different chemical compounds and efficiency. Thus use White or Red for FAA 107 for greatest range...other colors for Navigation
WHITE : The best visibility and efficiency.
RED : 2th in the visibility, efficiency is same as white but the best for warning.
GREEN 3th in the visibility and efficiency. Best for Standard RED/GREEN (Left/Right) navigation usage.
BLUE 4th in visibility and also efficiency. We are not suggesting this color for warning or navigation but special usage.
Bottom line: White and Red is the best option if you need long range visible strobes. And you can use the green to identify your flying platform direction. Blue is only for special applications.
Notice: The battery includes it's own PCM module. This module protects the battery from overcharge and discharge for long lifespan. If there is no life sign on the circuit when you press the button, probably discharge protection has activated because of low battery voltage. Just charge it.
FAA 107 Performance Standard for lighting UAS for Exemption from Daytime Operations Only:
Performance-Based Standards1. Applicant must provide a method for the remote pilot to maintain visual line of sight during darkness. 2. Applicant must provide a method for the remote pilot to see and avoid other aircraft, people on the ground, and ground-based structures and obstacles during darkness. 3. Applicant must provide a method by which the remote pilot will be able to continuously know and determine the position, altitude, attitude, and movement of their small unmanned aircraft (sUA). 4. Applicant must assure all required persons participating in the sUA operation have knowledge to recognize and overcome visual illusions caused by darkness, and understand physiological conditions which may degrade night vision. 5. Applicant must provide a method to increase conspicuity of the sUA to be seen at a distance of 3 statute miles unless a system is in place that can avoid all non-participating aircraft.
Features
- 6 hours in strobe mode of continuous operation with onboard battery.
- Powerful 5W LED
- No Cabling required
- Easy to use single button interface.
- On board battery status and charge indicator system.
- Compatible with all 5V MicroUSB cables and chargers.
- Battery with internal overcharge and discharge protection.
Usage
- ON/OFF: Press and hold the button for 3 seconds to turn ON or OFF
- Tap button to switch between modes Strobe, Flash and Fixed (spot)
- CHARGE: Plug it to any micro USB charger or computer port when charging required.
- - The LED will blink oe be solid once letting you know it charging
- - It takes 2 hours for empty batteries.
Notice: The battery includes it's own PCM module. This module protects the battery from overcharge and discharge for long lifespan. If there is no life sign on the circuit when you press the button, probably discharge protection has activated because of low battery voltage. Just charge it.
https://www.youtube.com/watch?v=whod0fAltEs
- SpecificationsDimensions: 22mm x 18mm x 10mm
- Weight: 4gr
- Current Consumption: <15mA per hour
- Charge Port: MicroUSB
- Charge Current: 40mA max.
- Charge Time: ~2 hours